New Holland Haytools & Spreaders

ID # 28402681

New Holland Discbine® PLUS Center-Pivot Disc Mower-Conditioners - Discbine® 312 PLUS

Call for Price
Overview

TRANSPORT WIDTH FT. IN. (M)

11’ 10” (3.6)

CUTTING WIDTH FT. IN. (M)

11’ 7” (3.5)

CLEANER AND CLOSER CUTTING

Get the cleanest and closest cut yet with the MowMax™ II PLUS true modular cutterbar. Faster knife tip speed, a slimmer cutterbar profile, and reshaped rock guards improve cut quality while providing a 30% lower cutting height.

TIME-SAVING INNOVATIONS

The standard QuickMax™ knife-change system and ShockPRO™ hubs are designed to save you hassle when you’re making hay. For additional peace of mind, the cutterbar is backed by a 36-month warranty.

PIVOT TO GREATER PRODUCTIVITY

Whether you need a nimble mower to enter tight places or big capacity for wide-open spaces, four center-pivot models, with cut widths from 10- to 16-feet wide, are designed and built with pride in New Holland, Pennsylvania.

FROM WIDE SWATHS TO NARROW WINDROWS 

Choose the best conditioning system for your crops – rubber chevron rolls, steel chevron rolls, or high-contact chevron rolls.Choose between the chevron intermeshing rubber or steel rolls, or the LeaningEdge™ flail tine conditioning system to fit your needs. Enhanced swath control surfaces behind the conditioning system result in neater-looking swaths with improved dry down.

 

Specifications
Model
Discbine® PLUS Center-Pivot Disc Mower-Conditioners
Category Name
Equipment
Sale Type
New
Manufacturer
New Holland
mowmax™ ii plus disc cutterbar

A CUT ABOVE THE REST

Haymaking season is no time for delays. That’s why we pioneered our true modular disc cutterbar decades ago. From this original design through today, the legendary New Holland disc cutterbar has been known for strength, reliability, and easy service. The latest design, the ultra-reliable MowMax™ II PLUS disc cutterbar, is no exception. Its commercial-grade durability and high-capacity, clean-cutting design will save you time and money.

LAWN-LIKE CUT, COMMERCIAL-GRADE DURABILITYNew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 312 PLUS

The MowMax II PLUS true modular cutterbar delivers our cleanest and closest cut yet. It’s similar to the cutterbar featured on Durabine™ PLUS disc headers for Speedrower® PLUS self-propelled windrowers, which means you get commercial-grade durability and performance. Plus, you’ll find a variety of enhancements over our previous generation.

• Longer knives extend each module’s cutting diameter by nearly an inch and turn at a faster tip speed compared to previous models.
• Reshaped rock guards provide better crop-to-knife engagement
• To improve cutting in light or late-season crops, the profile of the cutterbar was lowered by bringing the discs closer to the cutterbar with new low profile ShockPRO™ hubs.
• In combination with the longer knives, this design is more productive in down and tangled crops as cutting height is lowered over 30%, leaving less uncut crop behind.

SAVE TIME WITH THE QUICKMAX™ KNIFE-CHANGE SYSTEMNew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 312 PLUS

Time is precious when you’re making hay. To save you time and keep you cutting clean, the patented QuickMax™ knife-change system is standard on all Discbine® PLUS models. The system lets you quickly change knives with discs at a 45-degree angle to the cutterbar. In just seconds, you can change knives in just one-half cutterbar rotation, saving you time compared to traditional bolted knives and other competitive quick-change systems. Knife-lock technology assures that each knife is retained in the most difficult conditions. Best of all, the system does not require the use of special knives—it works with all approved New Holland knives.

3-YEAR MOWMAX CUTTERBAR WARRANTY

Every Discbine PLUS gives you peace of mind provided by 36 months of cutterbar warranty coverage, which includes one full year of base factory warranty plus two additional years of cutterbar warranty. You’re backed by the best in the business.

SET THE HEIGHT YOU LIKENew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 312 PLUS

It’s quick and easy to set cutting height using the travel-limiting pin. For the highest cut height, insert the pin into the rearmost hole. For the lowest setting, remove the pin and store it on the cylinder to allow the head to move through its full tilt range. For the best performance, operate headland lift in the float position, and the head tips back to adapt to terrain.

 

windrow & swath control

FROM WIDE SWATHS TO NARROW WINDROWS

Fast drying requires crop to be evenly distributed over a wide swath. To help, the Discbine® PLUS Series provides enhanced swath control surfaces behind the conditioning system.

THE ADVANTAGES OF SPREADING CROP WIDE AND THINNew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 312 PLUS

University tests confirm that the more leaves that are exposed to the sun, the faster crops dry and the more feed value is retained. Quick drying reduces sun bleaching and gives you an advantage when you need to beat the weather and bale or chop before the rain. Along with the WideDry™ conditioning system of your choice, the swath board wedges, and adjustable fins spread your crop wide and thin, exposing it to more sun for faster drying.

BETTER CONTROL MEANS BETTER WINDROWSNew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 312 PLUS

The full-width horizontal swath gate has been extended five inches longer than prior models for improved crop control and greater windrow uniformity. Adjustable crop-spreading wedges help break up crop streams, while adjustable crop fins provide additional windrow control. Windrows can be neatly shaped as narrow as three-feet-wide to any setting in between—up to six feet on the 310 PLUS, seven feet on the 312 PLUS, or eight feet on the 313 PLUS and 316 PLUS.

WEDGES AND FINSNew Holland Discbine® PLUS Center Pivot Disc Mower Conditioners Discbine® 312 PLUS

Windrow forming shields are over five inches taller than previous models and work with the swath gate to produce a tunnel effect. Specifically, this taller design—with greater curvature at the bottom—provides more precise windrow control, helping to tuck the edges in for neater-looking swaths with improved dry down.

 

technical specifications

Type

MowMax™ II PLUS true modular cutterbar

Cutting width ft. in. (m)

11’ 7” (3.5)

Cutting height in. (mm)

0.5 – 2.6 (12 – 65)

Cutting height w/ opt. adjustable shoes in. (mm)

0.5 – 5.6 (12 – 143)

Number of discs / knives per disc

7 / 2

Maximum disc speed @ 1,000 rpm PTO

2250

Hydraulic tilt/cutting height control

Standard

Tilt angle degrees

-2° to -10°

Header flotation

Vertical & lateral, adjustable springs

ShockPRO™ disc drive protection system

Standard

3-year factory cutterbar warranty

Standard

Chevron intermeshing rubber rolls

Optional

Chevron intermeshing steel rolls

Optional

Length in. (mm)

102 (2591)

Diameter in. (mm)

10.4 (264)

Drive method

Belt-driven, enclosed gearbox

Speed rpm

750 or 640

Conditioner roll tension adjustment

Standard

Conditioner gap adjustment

Standard

Compatibility

Optional

Number of tapered flail tines

100

Length in. (mm)

102 (2591)

Diameter in. (mm)

1400

Drive method

Belt

Speed rpm

1042 or 752 with kit

Conditioner gap adjustment

Standard

Swath width ft. (m)

7 (2.1)

Windrow width ft. (m)

3 – 7 (.91 – 2.1)

540 rpm, 6-spline 1-3/8” input speed

1,000 rpm, 21-spline 1-3/8” input speed

Standard

Slip and overrunning clutch protection

Standard

Drawbar swivel

Standard

Drawbar category

ASAE Category II or III

2-point semi-mount swivel

Optional

3-point hitch category

ASAE Category II, III-N, or III

Minimum PTO power hp

85

Hydraulic requirement – rubber rolls

1 double acting, 1 single acting

Hydraulic requirement – steel rolls

1 double acting, 1 single acting

Hydraulic requirement – flails

2 double acting

Electrical

7-pin connector for transport lights

Transport width ft. in. (m)

11’ 10” (3.6)

Operating weight – rubber rolls lbs. (kg)

5880 (2,667)

Operating weight – steel rolls lbs. (kg)

5980 (2,712)

Operating weight – flails lbs. (kg)

5760 (2,613)

literature
Name Link
Discbine® PLUS Center-Pivot Disc Mower-Conditioners - Brochure Download
Technical specifications Download