New Holland FP240 Pull-Type Forage Harvester - FP240
|
HEADS 3 ROWS / 8' 3" PICKUP MIN. HP REQUIREMENT 300 HP | |
THE BEST IN HIGH-CAPACITY AND CHOP QUALITYThe FP240 gives you the high-capacity performance, uniform chop length, and rugged performance you're looking for - from the 1,000-rpm driveline gearbox all the way to the cast iron spout base. | |
CONVENIENCE AND PEACE OF MINDBuilt-in knife sharpeners and hardened, reversible, easy-to-adjust shearbars make it easy to maintain cutting performance. Lightweight shielding and flip-up feedrolls provide easy access to all major components. For added peace of mind, rely on the Metalert® III electronic metal detector to protect your livestock. | |
SMOOTH FEEDINGTop chop quality starts with four feedrolls that smoothly deliver material to the cutterhead for an even cut. The front feedrolls are aggressive to handle heavy materials and pull in slugs. The smaller, rear feedrolls grip the crop tightly to ensure an even, precise cut. | |
UNIFORM CHOPPINGA massive,12-knife cutterhead is built to move more crop and chop it uniformly using full-width, spiral, hardened-alloy knives with tungsten edges. The result? High-quality feed with less power and less fuel consumption. |
UNIFORM CUT LENGTH IS KEYA uniform length of cut not only yields high-quality feed, it makes everything easier—unloading, blowing, storing and feeding. The key to a consistent chop is smooth crop flow through the forage harvester. It's a process New Holland has perfected and it's what makes these forage harvesters so effective. | |
SMOOTH, POWER-DRIVEN FEEDROLLSTop chop quality starts with four power-driven feedrolls that deliver material smoothly to the cutterhead. The front feedrolls are aggressive to handle heavy materials and pull in slugs. The smaller, rear feedrolls grip the crop tightly to ensure an even, precise cut. Spring-loaded upper feedrolls keep material compressed. | |
UNIFORM CHOPPING WITH 12-KNIFE CUTTERHEADThe heart of these forage harvesters is the massive 12-knife cutterhead that's built to move more crop and chop it uniformly using full-width, spiral, hardened-alloy knives with tungsten edges. There's no better cutterhead on the market, and none that's easier to sharpen. | |
MORE CUT LENGTH CHOICESYou'll get the widest selection of cut lengths to meet your exact feeding requirements. Vary length of cut by changing feedroll speed, adding or removing knives or by using one of six optional recutter screens for nonprocessor machines. | |
YOUR CONTROL CENTER EFFORTLESSLY MAXIMIZES PERFORMANCENO SLOWDOWN AT THE BLOWERSmooth crop flow continues at the blower. A 1000-rpm blower moves crop fast for increased productivity. |
FEATURES TO KEEP YOU CHOPPING AT PEAK EFFICIENCYChop quality is the hallmark of New Holland forage harvesters due to the built-in features that help to maintain them. Knife sharpening and shearbar adjustment are a snap and the cutterhead reverses to ensure a true cutting edge on all knives. | |
FLIP-UP FEEDROLLS FOR EASY CLEANING
| |
BUILT-IN KNIFE SHARPENERSA built-in knife sharpener in these forage harvesters features a huge, 3-inch-diameter, ratchet-advanced stone for faster-than-ever sharpening. | |
EASY MAINTENANCE, LONG WEARLightweight, hinged shielding panels lift easily, making lubrication, adjustment and inspection nearly effortless. And the shearbar is hardened on both the top and side for even wear and extra-long life. It’s also reversible, so when one side wears down, just turn it around. |
|
Optional CropPro™ Crop Processor |
Optional |
|
Construction |
Hardened ductile iron, steel shaft |
|
Weight, lbs. (kg) |
520 lbs (231kg) |
|
Roll width, in. (mm) |
26-7/8" (682.6 mm) |
|
Roll diameter, in. (mm) |
7-7/8" (200 mm) |
|
Roll gap, in. (mm) |
3/16" to 5/8" (4.8 to 15.9 mm) |
|
Roll speed |
2650 rpm upper, 2250 rpm lower |
|
Weight (single axle), lbs. (kg) |
4700 (2130) |
|
Length, ft. in. (m) |
21' 6" (6.5 m) |
|
Height with standard spout, ft. in. (m) |
11' 2" (3.4 m) |
|
Width, ft. in. (m) |
10' 8" (3.3 m) |
|
Number/type of knives |
12 single-edge hardened alloy |
|
Cutterhead, type/speed |
Cylinder, 850 rpm |
|
Cutterhead, diameter, in. (mm) |
21" (533.4 mm) |
|
Throat opening, in. (mm) |
24-3/8" x 6-5/8" (619.76 mm x 167.6 mm) |
|
Shearbar |
Quick adjust, reversible, hard-faced on vertical and horizontal surfaces |
|
Length of cut, in. (mm) |
3/16" to 7/16" (76.2 to 177.8 mm) |
|
Blower speed |
1000 rpm |
|
Recommended max. tractor hp |
300 hp |
|
Minimum power required |
180 PTO hp |
|
Knife sharpener |
3" manual, built-in |
|
Recutter screens (non processor units) |
6 sizes available |
|
Vertical wheel adjustment, in. (mm) |
6" (152 mm) |
|
Tire sizes, single axle |
14Lx16.1 8PR standard |
|
Tire sizes, tandem axle |
11Lx15-15 6PR |
pull-type-forage-harvester-brochure-us-en.pdf
Quick Links
Hours
Monday - Friday
8:30AM–5:30PM
Saturday
Closed
Sunday
Closed
Location
| Monday - Friday | 8:30AM–5:30PM |
| Saturday | Closed |
| Sunday | Closed |
