|
 SOLD BY EQUIPMENT DEALERS
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership
|
|
 D005785 Optional Hand Control
Is one of your excavator older, without an auxiliary electrical connection? We also have an in-cab adapter to plug into your Aux Electrical Connected attachments that will allow you to run them. Plug the adapter into the attachment, connect it to 12V and now you can run your new attachment on an older excavator. |
 Rotating head with helical actuator
Available with 180º rotating cutting the head, powered by a rotating helical actuator offers precise control for quick, clean trimming and limbing.
|
|
 Heavy duty build
The tree saw’s durable design and quality materials combine to create a saw that is able to stand up to the demanding work of cutting limbs and trees.
|
 No Grease Rotation
Thanks to the DSA530's rotating heliacal actuator, the head doesn’t rotate on a pin and doesn’t need greasing.
|
|
 Blade mounted on heavy duty bearing support
DropSaw's blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.
|
|
 Saw blade shielding
The durable shield encloses the blade for protection, directing the chips as it easily cuts through limbs and trees.
|
|
 Designed for maximum visibility
Making sure you have the best seat in the house, the tree saw was designed with maximum visibility in mind, allowing you to make cleaner and better cuts. |
|
 Easy Access Panels for Service
Built for the long haul, the tree saw has multiple removable panels for easier access and servicing.
|
|
 Clean Cuts
The tree saw makes clean work of limbing and trimming trees safely and quickly, leaving pruned trees with a clean cut.
|
|
 Better Access
Excavators can also go where tractors and skid steers cannot, giving you and your tree saw access to areas that had to be cleared by hand in the past. Now you can quickly and cleanly trim, limb and cut more efficiently than before.
|
|
 Bolt-on excavator adaptor
Our bolt-on mounting adaptors provide strength and future flexibility. If needed, your tree saw can easily be bolted to another adaptor to mount to your new excavator.
|
|
 Available with Gear motor or BENT AXIS PISTON MOTOR
Gear motors are a good cost effectvie choice for the average user and our Industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for pruning, trimming and land clearing. Built to last, these reliable motors can double the power of your output flow.
|
|
 CASE DRAIN – VENT TO ATMOSPHERE
To prevent pressure relief activation on the motor seal, the DXA530 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance.
|
|
 PROTECTIVE POWDER COAT FINISH
Heavy duty construction and a durable powder coated finish.
|
