Bauma Light S14

Specifications

Model	S14	Year	2023	Sale Type	New
Manufacturer	Bauma Light	Quantity	0	Manufacturer Qty	0
Price	Contact for price CAD	Hitch	1" pivot pins	Motor Type	Gerotor
Rotor Size	18"	Hydraulic GPM	Check Motor Options	Number Of Teeth	12
Tooth Part Number	H3000	Tooth Construction	High speed	Cutting Wheel Speed	Depends on GPM
Requires 12 Volt DC		Maximum Horizontal Cut	12"	Over Torque Protection	Relieve valve
Recommended Carrier Size	1-2 ton	Baumalight Connection Code	A04	Unit Weight (Shipping) Lbs.	394
Cutting Depth - Below Ground	6"	Cutting Height - Above Ground	No limit	Maximum Cutting Depth - Per Pass	2"
No. Of Remotes Required - Hydraulic	1

Description

Mini Excavator mounted Stump Grinder - S14

The S14 skid steer stump grinder is designed to go on both mini skidsteers and mini excavators. With a quick pull of two pins, a standard size skidsteer plate can be put on as well. The direct flow hydraulic drive is designed to provide the best torque and RPM to the cutting head as no flow is diverted to a swing cylinder. The S14 features round carbide teeth which can be rotated three times, letting you grind stumps longer. The unique positioning of the rotor allows the operator an excellent view of the stump grinding action, and the heavy duty fixed deflector safely directs the flow of debris. Cutting depth is up to 10" below ground. The S14’s size makes it ideal for grinding in tight areas, and a great choice for smaller carriers.

FEATURES

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership

Excavator Mount

This standard mounting plate is perfect for welding to your skid steer’s unique fitting.

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

6 FREE TEETH

All S14 Stump Grinder comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in the owner’s manual tub bolted to the frame.

More Teeth

The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.

Hydraulic Motor

Skid steer mounted Stump Blasters run on hydraulic motors. For best results, match your equipments flow rate to one of our available hydraulic motor options.

More Clearance

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

Greaseable Pins

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

Rotor

The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.