 SOLD BY EQUIPMENT DEALERS
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership
|
|
 REPLACEABLE BOLT-IN LINER
Save time by easily replacing the AR400 steel wear plates on the MS960 without needing to remove the rotor.
|
|
 Integrated push bar
When push comes to shove, the integrated push bar helps control
|
 Directional felling hook
Built into the pusher bar, the directional felling hook will directionally control wayward trees, sprawling clumps and low hanging limbs.
|
|
 ROLL BACK TO FELL STANDING TREES
The MS960’s frame is angled so that you can roll back the Brushy Mulcher, pulling back the pusher bar so that you can fully engage the mulching head. This allows the operator to use the mulching head to fell standing trees.
|
|
 SPRING LOADED HOSE SUPPORT
Take full advantage of the forward curl and roll back of the MS960 without risking expensive damage to the hoses. Unique to the Baumalight Brush Mulcher, the spring loaded hose support prevents the hoses from falling into harm’s way during forward curl.
|
|
 ADJUSTABLE BELT TENSIONER
The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt.
|
|
 OPTIONAL TWO-SPEED MOTOR
To maximize the rotor speed and torque to account for changing mulching material, the MS960 is available with a variable two-speed motor option.
|
|
 BENT AXIS PISTON MOTORS ARE A STANDARD OPTION
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs.
|
|
 ENHANCED operator VISIBILITY
The improved design of the MS960 mulcher head now allows the operator better visibility to the area you are mulching.
|
|
 6 FREE TEETH
All MS960 Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth can be convenienty stored in the enclosed spare tool compartment.
|
|
 IMPROVED WEIGHT MANAGEMENT
To improve the weight management of the Brush Mulcher, the MS960 is now designed with the rotor closer to the carrier. This unique design feature allows for smaller carriers to be able to manage a larger mulcher.
|
|
 Wire Protection Kit
If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in.
|
|
 heavy duty frame
Now completely redesigned for the 900 series Brush Mulcher, the heavy duty steel frame is constructed with T1 alloy tool steel sheet metal.
|
Unit on display at a local dealer