Bauma Light S40

Specifications

Model	S40	Year	2023	Sale Type	New
Manufacturer	Bauma Light	Quantity	0	Manufacturer Qty	0
Price	Contact for price CAD	Hitch	Quick Attach	Swing Arc	85°
Motor Type	Gerotor	Rotor Size	24"	Hydraulic GPM	Check Stump Cutting Size Chart
Number Of Teeth	20	Recommended HP Size	50-120	Requires 12 Volt DC
Tooth Part Number	H3000	Tooth Construction	High speed	Cutting Wheel Speed	Depends on GPM
Maximum Carrier Size	Check GPM & PSI	Over Torque Protection	Remote	Maximum Horizontal Cut	22"
Cutting Depth - Below Ground	24"	Unit Weight (Shipping) Lbs.	1,200	Cutting Height - Above Ground	No limit
Maximum Cutting Depth - Per Pass	1"	No. Of Remotes Required - Hydraulic	1

Description

High Performance Skid Steer Stump Grinder - S40

The S40 stump grinder is mounted with a bent axis piston motor. By matching a motor to your skid steers hydraulic flow these high efficiency motors make the most hydraulic power transforming it into the highest available stump grinding performance. Stocked with 20 High speed teeth the massive 1.25” thick steel rotor provides the back bone for the Skidsteer mounted stump grinder. The high number of teeth means that each tooth needs to do less work. Each tooth only needs to make a small cut, because the work is shared by more of these highspeed teeth, which last longer and typically only need 2 or 3 replaced at a time. The bolt-on designed teeth allow for straightforward replacement. The teeth can also be rotated up to 3 times to provide a renewed cutting surface even in the field.

The extra-large Blast shield is designed with dual rows of chain curtains to contain and control chips during grinding. The Blast shield is hinged to give the best protection and chip control throughout the grinding process. This hinge also allows the shield to be raised to get into tight areas and for easy access to the rotor and teeth.

FEATURES

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership

D004460 OPTIONAL HAND CONTROL

Is one of your skidsteers older, without an auxiliary electrical connection? We also have an in-cab adapter to plug into your Aux Electrical Connected attachments that will allow you to run them. Plug the adapter into the attachment, connect it to 12V and now you can run your new attachment on an older skidsteer.

Visibility

Excellent Visibility from the operators seat.

Swing Arm

Dual swing cylinders for smoother, more controlled swing speed operation.

QC Generators outlets Hose Shield

Double shielded hoses for extra protection.

Aux

Baumalight now offers a more direct and simple way of connecting to your skid steer's auxiliary electrical connection. Simply connect the hydraulics and plug in the electrical. Now you can control the attachment from inside your cab.

QC Generators outlets Bent Axis Piston Motor

Our industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for your stump grinding needs.

Rotor

The massive 1.25" thick steel rotor provides the back bone for the Holt Eraser stump grinder. It's the anchor of the carbide teeth.

QC Generators outlets Blast Shield

Designed with an extra-large Blast shield with dual rows of chain curtains to contain and control chips during grinding. After grinding it also helps clean up giving you the ability to back fill without switching attachments.

FREE TEETH

The S40 Stump Grinder comes with 3 free replacement teeth and 1 extra teeth holder. These replacement teeth can be conveniently stored in the spare tool compartment.

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.