New Holland ProRotor™ Rotary Rakes - ProRotor™ 3223
|
PAINT POWDER PAINT CROP DELIVERY LEFT SIDE | |
CLEAN ROTARY RAKING ACTIONLike a mechanical pitchfork, each tine arm uses flexible tines to lift and carry the crop to the windrow. Unlike ground-engaging rakes, ProRotor™ tines don’t need to touch the soil, so there is less risk of contaminants being swept into the windrow. The gentle rotary action builds a well-shaped windrow without roping, and promotes drying after the hay is raked. | |
A CHOICE OF MODELSThree ProRotor models with working widths ranging from 13’9” to 25’7” are available to suit your raking needs. Choose the ProRotor 3114 single-rotor, side-delivery rake, the ProRotor 3223 dual-rotor, side-delivery rake or the ProRotor 3226 dual-rotor, center-delivery rake. | |
HIGH-LIFT TINE ACTIONProRotor tine arms are different, and that difference provides more capacity and better performance than rakes with straight or radial-mounted tine arms. ProRotor tine arms are curved and mounted at a tangent so the tines are in optimum position to pick up and deliver hay to the windrow. | |
MAINTENANCE-FREE GEARBOXESThe sealed rotor gearbox is lubricated by oil and requires only periodic daily maintenance of the crown and pinion, saving you time and providing reliable service. |
PROROTOR™ ROTARY RAKE GEARBOXThe heart of a rotary rake is the rotor gearbox, that’s why ProRotor rake rotors are sealed and lubricated by oil for reliable and dependable service life. |
CURVED TANGENTIAL MOUNTED ARMSProRotor tine arms are mounted at a tangent, placing the tines in the optimum position for gathering hay. The smooth cam action and specially formed tine arm curve lift the tines quickly as hay is deposited into the windrow, resulting in an even and consistent windrow. To handle your heaviest crops, each tine arm is secured by a through bolt and clamping bolt for high reliability. |
|
Paint |
Powder Paint |
|
Crop Delivery |
Left Side |
|
DIN Width - Sing Swath or Min (m/ft) |
6.6/21.7 |
|
DIN Width - Double Swath or Max (m/ft) |
7.1/23.3 |
|
Length (m/ft) |
8.2/26.9 |
|
Transport Length (m/ft) |
7.4/24.3 |
|
Width (m/ft) |
3/9.8 |
|
Transport Width (m/ft) |
2.2/7.2 |
|
Transport Height w/ arms removed (m/ft) |
- |
|
Height (m/ft) |
- |
|
Capacity (hph/aph) |
7.3/18 |
|
Weight (kg/lb) |
1350/2976 |
|
Rotor Diameter (m/ft) |
3/9.8 |
|
Clean Swept Working Width (not noted on supplied tables) (m/ft) |
4.9/16.1 |
|
Cam Track Diameter (mm/in) |
260/10.2 |
|
Power Requirement (kw/hp) |
37/50 |
|
PTO Speed |
540 |
|
PTO Type |
Double Wide Angle CV |
|
Overrunning Clutch |
Integral to PTO |
|
Protection |
Individual Radial Pin Clutch on each Rotor |
|
Hitch |
Drawbar |
|
Special Hitch Pin |
Standard |
|
Rotor Articulation System |
Rear Rotor - 3D |
|
Num. Rotors |
2 |
|
Num. Arms / Rotor |
11 Front / 12 Rear |
|
Num. Tines / Arm |
4 |
|
Tine Arm Diameter (mm/in) |
35/1.4 |
|
Tine Arm Attachment to Gearbox |
2 bolts |
|
Tine Arm Removal for Transport/Storage |
Lynch pin |
|
Tine Diameter (mm/in) |
9/0.4 |
|
Front Swath Board |
Optional |
|
Rear Swath Board |
Standard |
|
Swath Board Adjustment/Folding |
Hydraulic/Mechanical |
|
Height Adjustment |
Hyd Lift/Mech Stop |
|
Rotor Headland Clearance (mm/in) |
500/19.7 |
|
Removable Tine arms/ Folding Guards |
Standard |
|
Undercarriage Tires/Wheels |
18.5x8.5-8 PR6 |
|
Axle |
Tandem Front / Tandem Rear + 2 additional support wheels on rear |
|
Hyd. Requirements |
1 Single Acting, 1 Double Acting |
|
Chassis Tires/Wheels |
NA |
|
Rear Wheel Steering |
NA |
|
Max. Turning Angle |
NA |
|
Transport Lighting |
Standard |
|
Transport Safety Chain/Hitch Check Chains |
Transport Safety Chain |
|
SMV Emblem |
Standard |
|
Transport Lighting Requirement |
ASAE 7 Pin |
|
Electrical Requirements |
NA |
|
Operational Speed |
8-14 k/h / 5-8.5 mph |
Quick Links
Hours
Monday - Friday
8:30AM–5:30PM
Saturday
Closed
Sunday
Closed
Location
| Monday - Friday | 8:30AM–5:30PM |
| Saturday | Closed |
| Sunday | Closed |
