New Holland Windrower Headers - Haybine® 18HS
|
CUTTING WIDTH FT. IN. (M) 18' 3" (5.56) NUMBER OF DISCS | |
REDESIGNED FOR FASTER SPEEDDurabine™ PLUS Series disc headers take advantage of faster speeds on Speedrower® PLUS windrowers without compromising cutting and conditioning quality. | |
CLEAN & CLOSE CUTTINGThe MowMax™ II PLUS true modular cutterbar found on Durabine PLUS heads provides an even cleaner cut with faster tip speed and a lower-profile compared to previous models. | |
LEGENDARY PERFORMANCEHS Series Haybine sickle headers continue the legacy of impeccable cutting performance, fast drying, and time-tested reliability. | |
UNIFORM, FAST-DRYING SWATHSChoose the best conditioning system for your crops – rubber chevron rolls, steel chevron rolls, or high-contact chevron rolls. |
CLEAN AND CLOSE CUTTINGTo maximize productivity, the all-new MowMax™ II PLUS true modular cutterbar delivers a cleaner cut. Longer knives extend each module’s cutting diameter by nearly an inch and turn with 14 mph faster tip speed (195 mph vs 181 mph) than the previous series at 2,600 disc rpm. For better crop-to-knife engagement, the cast rock guards were reshaped. To improve cutting in light or late-season crops, the profile of the cutterbar was lowered by bringing the discs closer to the cutterbar with new low profile ShockPRO™ hubs. Along with the longer knives, this design is more productive in down and tangled crops as the cutting height was lowered nearly 30%, leaving less uncut crop behind. |
HIGH-CAPACITY CUTTING PERFORMANCEDual counter-stroking sickles feature a timed modular wobble drive that assures smooth cutting with minimal vibration and maintenance. Over-serrated knives slice quickly at over 1,800 rpm and the three-inch stroke delivers unrivaled high-capacity cutting for best-in-class performance. Bolt-on knife sections provide long cutting life and easy replacement, and adjustable knife hold-down clips help speed up maintenance. | |
CONSISTENT CROP FEEDINGThe fully-adjustable five-bat reel sweeps crop smoothly to the exclusive floating auger. This 20-inch auger with five-inch flighting floats up to two inches to handle heavy crops and delivers crop evenly to the conditioning rolls. | |
PROVEN CONDITIONING
|
|
Cutting width ft. in. (m) |
18' 3" (5.56) |
|
Overall width ft. in. (m) |
20' 3" (6.17) |
|
Weighting with conditioning system lbs. (kg) |
4370 (1983) |
|
Weight less conditioning system lbs. (kg) |
– |
|
Cutting width ft. in. (m) |
– |
|
Cutting height range in. (mm) |
– |
|
Cutting angle |
– |
|
Number of discs |
– |
|
Maximum disc speed rpm |
– |
|
Number of reversible, swing-away knives |
– |
|
Knife tip speed mph (kph) |
– |
|
Flotation |
– |
|
ShockPRO™ Disc Drive Protection System |
– |
|
3-Year MowMax Factory Cutterbar Warranty |
– |
|
Cutting height range in. (mm) |
1.2-6.2 (30.5-157.5) |
|
Cutting angle |
-6 to -12 degrees |
|
Type |
Timed, dual, counterstroking |
|
Knives |
Over serrated, bolted |
|
Guards |
2-tine, double-hardened |
|
Skid shoes |
4 |
|
Drive type |
Open, dual, wobble |
|
Speed spm |
1810 |
|
Stroke in. (mm) |
3 (76) |
|
Type |
5 bat |
|
Adjustments |
Fore/aft and vertical |
|
Mechanical drive rpm |
58 - 83 |
|
Hydraulic drive (optional) rpm |
0 - 76 |
|
Speed adjustment (mechanical) |
Variable sheave |
|
Diameter in. (mm) |
42 (1067) |
|
Drive type |
Belt and chain |
|
Tine bars |
Segmented |
|
Bushings / bearings* in. (mm) |
1.25 (31.75) |
|
Auger diameter in. (mm) |
20 (508) |
|
Auger type |
Floating |
|
Type |
Single, floating |
|
Maximum diameter in. (mm) |
20 (508) |
|
Floating range in. (mm) |
2 (50.8) |
|
Flighting depth in. (mm) |
5 (178) |
|
Speed rpm |
287 |
|
Roll types |
Chevron-pattern rubber or steel, or high-contact chevron |
|
Roll length in. (mm) |
102 (2591) |
|
Roll diameter in. (mm) |
10 .16 (258) |
|
Roll speed rpm |
717 |
|
Roll pressure |
Hand crank |
|
Roll gap |
Adjustable stop-bolt |
|
Roll drive |
Spur gearbox and PTOs |
|
Windrow/swath width in. (mm) |
38 to 96 (965 to 2438) |
|
Cutting width ft. in. (m) |
18' 3" (5.56) |
|
Overall width ft. in. (m) |
20' 3" (6.17) |
|
Weighting with conditioning system lbs. (kg) |
– |
|
Weight - rubber rolls lb. (kg) |
4370 (1983) |
|
Number of discs |
– |
|
Maximum disc speed rpm |
– |
|
Number of reversible, swing-away knives |
– |
|
Knife tip speed mph (kph) |
– |
|
Flotation |
– |
|
Cutting angle and height |
– |
|
Header ground clearance - bottom of skid shoes in. (mm) |
– |
|
Hood liner |
– |
|
Type |
Timed, dual, counterstroking |
|
Knives |
Over serrated, bolted |
|
Guards |
2-tine, double-hardened |
|
Angle range degrees |
neg. 6 to neg. 12 |
|
Skid shoes |
4 |
|
Cutting height in. (mm) |
1.2-6.2 (30.5-157.5) |
|
Type |
Open, dual, wobble |
|
Speed spm |
1810 |
|
Stroke in. (mm) |
3 (76) |
|
Type |
5-bat |
|
Adjustments |
Fore/aft & vertical |
|
Mechanical drive rpm |
52-83 |
|
Hydraulic drive (optional) rpm |
0-76 |
|
Speed adjustment (mechanical) |
Variable sheave |
|
Diameter in. (mm) |
42 (1067) |
|
Drive |
Belt & chain |
|
Tine bars |
Segmented |
|
Bushings / bearings in. (mm) |
1.25 (31.75) bearing w/collar at cam end & bushings at all other locations |
|
Type |
– |
|
Length in. (m) |
– |
|
Roll speed rpm |
– |
|
Roll pressure |
– |
|
Roll gap |
– |
|
Windrow/swath width in. (mm) |
– |
|
Types |
Chevron-design intermeshing rubber or steel; or high-contact chevron urethane |
|
Roll length (crush area) in. (mm) |
102 (2591) |
|
Roll diameter in. (mm) |
103.375 (263.5) |
|
Roll drive |
Spur gearbox & PTOs |
|
Speed rpm |
717 |
|
Roll pressure |
Hand crank |
|
Roll gap |
Adjustable stop-bolt |
|
Windrow width in. (mm |
38-96 (910-2438) |
Quick Links
Hours
Monday - Friday
8:30AM–5:30PM
Saturday
Closed
Sunday
Closed
Location
| Monday - Friday | 8:30AM–5:30PM |
| Saturday | Closed |
| Sunday | Closed |
