ID # 25781907

Bauma Light CF372

Call for Price

CF372 Skid Steer Rotary Brush Cutter Model

The rugged frame of the CF372 heavy-duty rotary brush cutter houses two AR400 blades featuring an 82" path width. The 1/4” steel deck is designed to stand up and perform in rough terrain while cutting small trees, brush, unwanted weeds and grass. The 72" mouth of this unit is protected by a heavy-duty chain that controls flying debris, but still allows brush to easily enter. The rear of the unit is also guarded by a chain curtain so standing brush enters and mulched debris exits as you break new trails, clear ditches, construction, property sites, and other overgrown areas.

Sale Type
Bauma Light
Maximum HP
Check Flow & PSI on Skid Steer
Path Width
Unit Weight
1390 lbs.
Cutting Width
Deck Structure
1/4" steel
Attachment Type
Universal Skid-Steer Plate
Recommended GPM
Check Motor Options
Number Of Blades
System Protection
Built In Hydraulic
Dimensions (LxWxH)
Low Cutting Height
Min Carrier Weight
4,500 lb
Discharge Protection
Link Chain Curtain Front and Back
Max Brush Felling Size
Available Motor Options
M450, M550, M650
QC Generators outlets

Two Cuts per Pass

As the rotating rotor mass throws the slasher blades at small diameter trees, the blade slices small sections away as the Rotary brush cutter advances forward. The curved cutting tips of the slasher blades give the Rotary brush cutter two cuts per pass of each blade. The leading tip takes a small bite and is immediately followed by the second tip taking another bite at 26–52 slashes per second with devastating results. Available in either 2 or 4 blade configurations the Rotary brush cutter’s reversible/replaceable blades are made of long lasting 1/4" AR 400 steel.

Bauma Light CF372

Gear Box

Standard on all Rotary Brush Cutter models is a relief valve. Set at 3,000 psi, this valve disengages the driveline if the hydraulic system pressure is too great, thereby protecting both the skidsteer and the Rotary brush cutter.

The Rotary brush cutter uses a bevel gearbox capable of handling up to 90HP for final drive output. More durable than conventional direct drive setups, these gearboxes prevent shocks from cutting being passed to the drive motor.

Bauma Light CF372

Hose Armour

Standard on all Rotary Brush Cutter models is Hose Armour. This is a tough wrap which coils around the hoses and protects them from the harsh environment of brush cutting. The armour helps to prevent any punctures from fallen brush or trees.

Bauma Light CF372

Slasher Blades

Crafted from 1/4" AR 400 steel, the unique profile of the slasher blades provides increased cutting surface. The blade’s thin reversible profile continuously provides a sharp edge.

Bauma Light CF372

Blade Mount

To secure slasher blades to the blade assembly, Baumalight uses Gr. 8 bolts capped off with castle nuts and cotter pins. The blade mount uses a fully welded collar to drop the blade; this spacing helps to reduce the blade from binding while in operation.

Bauma Light CF372

2-Way Model

2-Way models feature a durable one piece rotor assembly. Constructed of a single 3/4" plate of steel and finished with a slasher blade on each end. The 2-way blade models provide up to 26 slashes per second.
QC Generators outlets

Front & Rear Chain Curtains

A heavy-duty chain curtain reduces discharge of debris. Unlike traditional chain curtains, Baumalight’s Rotary Brush Cutter uses a curtain rod setup that is free of welds. This setup allows the chain to absorb the impacts and places less strain on the welded link for longer curtain life.

QC Generators outlets

To protect the output shaft from impact or contamination caused by debris, each model of Rotary Brush Cutter is finished off with a heavy-duty output shaft shield.


QC Generators outlets Powder Coated Finish

Heavy-duty construction and a durable powder-coated finish.

Bauma Light CF372 Anti-Slip Strip

Extra traction from anti-slip strips provides improved safety as well as ease of entry and exit from the cab.