ID # 25781964

Bauma Light TN560

Call for Price

TN560 Trencher for Skidsteer

Dig deep, an impressive 5 feet deep with Baumalight’s TN560 Trencher for skidsteer. Ideal or landscapers or contractors who need to safely bury gas lines, electrical line, plumbing or drainage lines, the Bamalight TN560 will cut trenches up to 60” deep and between 6” to 10” wide, getting you far underground and below the frost line. The TN560 trencher is powered by a planetary drive system. With no roller chain to worry about, the planetary drive unit delivers hydraulic power directly to the sprocket of the digging chain for optimal trenching performance.
The TN560 can be mounted to skidsteers between 3000 and 7000 lbs.


Sale Type
Bauma Light
Universial skidsteer
1,500 lbs.
Drive Type
Trencher Depth
Trencher Width
6" to 10"
Main Shaft Size
2-9/16" solid hardened steel
Horse Power (HP)
40 - 100
Over Torque Protection
Hydraulic relief
Min. / Max. GPM Skidsteer
12 to 25
Min. / Max. GPM Tractor/Excavator
22 to 25

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership

Bauma Light TN560 side auger

Baumalight Trenchers are designed with a convenient side auger. The side auger keeps the dirt clear from the trenching action but still near the trench when it’s time for back filling.

Bauma Light TN560 crumb scraper bar

The Trencher has a crumb scraper bar as standard equipment, this helps to scrape and sweep extra dirt and debris into the chain where it is lifted out of the trench. The heavy construction and hinged design mean that the scraper performs no matter what depth of trench you are digging.



The sealed drive keeps the dirt out and the trencher going. The compact and stron g planetary drive unit delivers the hydraulic power directly to the sprocket of the digging chain for good digging performance. There are no roller chains that jump or stretch. Maximum torque transfer. The motor is mounted directly in-line with the main sprocket.

Bauma Light TN560 solid steel nose

The Baumalight Trencher’s heavy duty nose is precision machined from a piece of solid steel. It runs freely on dual tapered roller bearings to deal with the extreme forces of trenching.

Dirt is the enemy of all bearings. A precision machined washer protects the bearings from rocks and dirt. This initial barricade is reinforced by the rubber seal on the bearings, finishing the job is the easily accessible grease fitting which keeps the bearings lubricated and protected from moisture and keeps our nose running freely.

Bauma Light TN560 adjustable chain tension

Adjusting the chain tension with a couple of pumps. The grease cylinder tensioner allows you to adjust the tension of the chain quickly with only a grease gun. By applying grease to an internal cylinder the roller nose is pushed forward taking the slack out of the chain. What could be a long frustrating process is now a few quick pumps.