ID # 25781921

Bauma Light S18

Videos
Call for Price
Overview

Excavator mounted Stump Grinder - S18

The S18 skid steer stump grinder is designed to go on both skidsteers and small excavators. With a quick pull of two pins, a standard size skidsteer plate can be put on as well. The direct flow hydraulic drive is designed to provide the best torque and RPM to the cutting head as no flow is diverted to a swing cylinder. The S18 Baumalight stump grinder is offered with three motor options to best match your flow. Be sure to check out the Stump Cutting Times charts below to see how fast you can grind stumps with the flow of your excavator. The unique positioning of the rotor allows the operator an excellent view of the stump grinding action, and the heavy duty fixed deflector safely directs the flow of debris. Cutting depth is up to 10" below ground.

Specifications
Model
S18
Year
2023
Sale Type
New
Manufacturer
Bauma Light
Hitch
1" pivot pins
Motor Type
Gerotor
Rotor Size
24"
Hydraulic GPM
Check Motor Options
Number Of Teeth
34
Tooth Part Number
S1000
Tooth Construction
Planer
Cutting Wheel Speed
Depends on GPM
Maximum Horizontal Cut
22"
Over Torque Protection
Relieve valve
Recommended Carrier Size
1.5-4 ton
Baumalight Connection Code
A04
Unit Weight (Shipping) Lbs.
642
Cutting Depth - Below Ground
10"
Cutting Height - Above Ground
No limit
Maximum Cutting Depth - Per Pass
5"
No. Of Remotes Required - Hydraulic
1
features
 

https://baumalight.com/stump-grinder/img/features/local-support.jpg SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership

Bauma Light S18 Excavator Mount

This standard mounting plate is perfect for welding to your skid steer’s unique fitting.

Bauma Light S18 Carbide Tipped

Like the finest saw blades, the cutting teeth on Stump Blasters are carbide tipped. This incredibly hard material ensures reliable cutting performance. When grinding stumps, buried hazards are inevitable; gravel, stones even metal posts are not uncommon to “find”. Our carbide teeth are designed to stand up to this abuse and keep on blasting stumps to dust.

Bauma Light S18 6 FREE TEETH

All S18 Stump Grinder comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

Bauma Light S18 More Teeth

The high number of teeth means that each tooth needs to do less work. Each of the Stump Blasters teeth only need to make a small cut, because the work is shared by more of our rugged teeth they last longer and usually only require 2 or 3 replacements at a time. The bolt-on designed teeth allow for straightforward replacement.

Bauma Light S18 Hydraulic Motor

Skid steer mounted Stump Blasters run on hydraulic motors. For best results, match your equipments flow rate to one of our available hydraulic motor options.

Bauma Light S18 More Clearance

The Stump Blaster’s carbide teeth extend a full 1-¼ inches from the rotor. This prevents chips and mulch from getting plugged. More chip clearing produces smoother operation and reduces heat build-up that can damage the rotor and cause premature tooth failure.

Bauma Light S18 Greaseable Pins

Our grease pins are zinc plated to prevent corrosion which will allow for smoother operation of the units joints over their lifetime.

 

Bauma Light S18 Rotor

The massive ¾" thick steel rotor provides the back bone for the Stump Blaster cutting system. It’s the anchor for the carbide tipped teeth. For smooth operation it’s important that the rotor remains solid, with no flexing. The rugged rotor also provides the Stump Blaster with the extra momentum needed when the grinding is tough, making sure the Stump Blaster can power through the hardest stumps.

 

Videos

Videos